Product
SAUNA. M1 fixed outdoor sauna
Technical reference
Specifications.
M1 dimensions, materials, module details, services, and site requirements.
A short delivery check confirms access, services, delivery path, and placement before production.
M1
M1 specifications.
Dimensions
3300 × 2200 × 2500 mm (L × W × H)
Footprint
7.3 m²
External envelope
Approx. 18.2 m³
Transport weight
Approx. 1,800 kg
Capacity
4–6 persons
Typical bathing temperature
60–100 °C
Electrical
400 V three-phase
Glass / door
Panoramic tempered safety glass. Glass door with left or right opening option.
Heating / controls
Included sauna heating system. Site power requirements checked before order.
Heating and operation
Bathing heat and operating basis.
Bathing heat
The included sauna heating system brings the cabin to bathing temperature and remains responsible for stones, steam, and löyly.
Controls
The final control basis, compatible equipment, and operating instructions are provided for the confirmed heating system.
M4 where included
Optional remote pre-warm and baseline-warmth layer. M4 does not remotely start or control the sauna stove.
Care
Material care, cleaning, and routine maintenance guidance accompanies the product.
Support
Warranty and support terms are supplied with the order.
M1–M7
Module specifications.
M1
Fixed sauna
3300 × 2200 × 2500 mm
Timber interior, panoramic glass, included heating system, and space for 4–6 people.
M2
Water access
1500 × 2000 × 300 mm
Waterside extension with powder-coated black steel stairs and natural timber deck planks.
M3
Transition
1500 × 2000 × 2500 mm
Skylit changing room with bench and service-zone provision.
M4
Thermal readiness
Site-dependent
Remote pre-warming or maintained baseline warmth. The stove remains the bathing heater.
M5
Rinsing
500 × 100 × 2000 mm
316L stainless outdoor rinse point with hose connection or reviewed plumbed supply.
M6
Storage
600 × 300 × 1500 mm
Weather-sealed and ventilated storage for towels, robes, wood, and nearby equipment.
M7
Cold immersion
1500 × 2000 × 2500 mm
Single-person cold immersion basin with hose fill or reviewed plumbed supply.
Materials
Fixed material basis.
Materials and finishes are selected as part of the SAUNA. design.
Exterior
Black thermally modified exterior timber cladding in the SAUNA. strip rhythm.
Interior
Natural sauna-grade timber to bench, back wall, and cabin surfaces.
Floor
Natural timber floor planks or grids over an outdoor-rated floor build-up.
Glass
Panoramic tempered safety glass.
Steel
Powder-coated black steel bottom rim and exposed steel details.
Roof
Double side-pitched dark roof build-up.
Site and delivery
Requirements before placement.
Preparation information
Foundation, electrical, drainage, access, and placement information provided for the confirmed site.
Foundation
Prepared concrete slab or screw piles for the confirmed product and placement method.
Electrical
Active sauna stove load, plus the reviewed M4 load where included.
Water / drainage
Required where selected M5 or M7 functions depend on plumbing.
Access
Vehicle delivery path and crane access where direct placement is not possible.
Permits
Municipality-dependent and confirmed for the site.
Placement
Exposure, view, services, delivery path, lifting method, and local responsibilities reviewed before production.
Site preparation
If site preparation is needed, use your own team or ask SAUNA. to arrange it.
Delivery and placement
From assembled product to site.
Product condition
SAUNA. M1 is delivered as an assembled sauna unit.
Delivery path
Vehicle access, unloading, turning space, and the route to the placement position are confirmed before production.
Placement
Direct placement, crane placement, or special handling is selected for the confirmed access condition.
Site readiness
Foundation, power, required water or drainage, access, and local permissions remain site responsibilities unless separately agreed.
Final connection
Electrical connection, commissioning, and any required plumbing are completed within the confirmed responsibility scope.
Documentation
Material for decisions and delivery.
Product specification
Confirmed product, dimensions, materials, heating basis, controls, and selected additions.
Site information
Foundation, services, access, delivery path, lifting, and placement information for the confirmed site.
Operating information
Control, care, cleaning, maintenance, and support information for the confirmed product.
Installation information
Product interfaces for the site team and installer.
Compliance basis
Applicable product and installation documentation is confirmed for the product, equipment, market, and intended setting.
Specification pack
Technical material for your site.
Product, module, placement, service, and delivery specifications are provided for your confirmed site context.